Everything you need to get you started. With GME’s TX3100 Starter Kit, you’ll begin your UHF CB experience with everything you need from the get-go. The super compact size and power, combined with its ease of use, makes it a perfect UHF CB radio for all types of users. Coupled with the AE4018K2 high performance antenna and MB407SS mounting bracket, this Starter Kit is all you’ll need in the one box!
Compliant Specification - Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX - 476.425-477.125MHz
Number of Channels - 80 UHF CB
Channel Spacing - 12.5 kHz
Operation Mode - Simplex channels 1–80 Semi Duplex channels 1–8, 41–48.
Scanning Speed - 20 channels per second
Antenna Impedance - 50 Ohms nominal
Nominal Battery Voltage - 13.8 volts DC
Operating Voltage Range - 10–15 volts DC
Overvoltage Protection - 25 volts DC max. At 18 volts DC the RF power is reduced, and the words ‘Hi DC’ flash.
Overcurrent Protection - In-line 2A Fuse
Frequency stability - ±2.5 PPM
RF Output - 5.0 watts max.
Spurious Emission - <-70 dBc
Maximum Deviation - <± 2.5 kHz at + 20 dB limiting
Transmit Frequency Response - +6 dB per octave 300 Hz to 3 kHz + 1-3 dB.
Current Consumption - 1.5 amps with 50 Ohms termination
Intermediate Frequencies - 1st -38.85 MHz 2nd -450 kHz
Sensitivity - -123 dBm for 12 dB SINAD unweighted
Selectivity - -6 dB at + 3.5 kHz ‑60 dB at ± 12.5 kHz
Intermodulation Immunity - 73 dB
Blocking Immunity - 100 dB
Spurious Response Immunity - 70 dB
Audio Output Power - 70 dB
Audio Signal to Noise - >45 dB
Current consumption - < 180 mA muted 600 mA @ max. A.F output
Conducted Spurious Emission - <-57 dBm
Dimensions - 102 (W) x 87 (D) x 23 (H) mm