RIMX232 Radio Modem

$435.00
Select Frequency Range
RI/RIMX232
+
Buy now with 1-click

The RIMX232 Radio Modem provides a reliable wireless communications link between two serial devices. The RIMX232 can be used in a variety of data communications applications that require a simple to use invisible data link.

High speed data streaming permits point-to-point error free transfers upto 14400bps half duplex.

Repeater mode enables the Radio Modem to extend the effective operating range of a point-to-point link by forwarding data packets to a maximum of 3 repeater hops. 

The Radio Modem uses unit & site addressed data packets with error checking and packet acknowledgements to achieve a well managed highly reliable wireless link. The on-air data rate is selectable from 600 to 14400 bps, thus improving network access for multiple point-to-point links within close proximity.

Configure the RIMX232 for point-to-multipoint broadcast mode and combine with any number of intelligent host computers/ controllers to implement very large networks.

The RIMX232 Radio Modem supports a range of built-in diagnostic functions that can be used for network interrogation, network problem finding and radio site & range testing.

FEATURES

  • Addressable Point-to-Point, Point-to-Multipoint
    and Broadcast Multidrop

  • Licence exempt operation

  • Serial protocol. 8 data/1 stop/ no parity

  • DTE Speed selectable 600-115200bps

  • Air data speed selectable  600-14400bps (UHF)

  • DTE flow control - hardware/software/none

  • 96 byte serial receive/transmit buffer

  • On-air data encryption and 100% code balancing.

  • Increased range with external antenna

  • Simple built-in command line configuration

  • Built-in RF link diagnostics

  • Remote over-air unit configuration

  • Modem status indicators

  • Low operating current. Auto standby mode

  • Low profile extruded aluminium enclosure.

  • 7-15V DC power supply.

OPERATING SPECIFICATIONS

  • Operating voltage of 7 to 15VDC

  • Average current of 36mA (data streaming).

  • Standby current of 15mA.

  • Shutdown current of 440uA, for long-term battery operation (DTR activated).

  • Physical: Width 62mm, Depth 24mm, Height 103mm. (excludes antenna)

  • Operating temperature of 0 to 55 degrees C

RADIO SPECIFICATIONS

  • Radio approval EN 300-220-1,
    ETS 300-683, AS4268.2 
  • Australian C-Tick Approval
  • Transmit power:
    433.920MHz - 10mW
    151.300MHz - 100mW
    918.525MHz - 3mW
  • Receiver sensitivity -100dB for 1ppm BER (UHF)
  • Aerial: SMA female connector